Roll-A-Dock
Let the good times roll
Roll-A-Dock is simply the fastest and
easiest way to get full enjoyment from your waterfront property.
In cold climates, there’s no need to endure frigid water – just
roll it in and you’re ready for action. Roll-A-Dock is ideally
suited to gradual slopes and works equally well on soft or rocky
bottoms. A basic dock can be easily placed with a vehicle or
installed in a matter of minutes by as few as two
people.
Easy Adjustment Over a Wide Range
of Depths
A built-in winch with removable hand crank
allows quick height adjustment for different depths or changing
water levels. Adjustments are easily made without ever stepping
into the water. Standard Model adjusts from 2-1/2' to 5-1/2'. Deep
Water Kit adjusts from 2-1/2' to 8'.
4' and 6' Widths, Aluminum or
Galvanized Steel
While some portable docks are as
narrow as 36", Roll-A-Dock gives you the choice of 4' or 6' wide
models - plenty of room for people to meet and pass. Select
all-aluminum construction for low weight and easy handling or
galvanized steel for maximum strength.
Decking Options
For
details on decking materials, click here.
 Cedar |
 Skidguard* |
 Aluminum |
 Vinyl |
 ThruFlow |
| * available on 4' wide
docks only. |
Design Your Own Dock
Layout
Roll-A-Dock is easily lengthened with add-on
sections or expanded to form
“T”s, “L”s or side platforms. A
wide variety of accessories are also available. Add-on sections
can be attached to one or both sides. Available sizes: 2', 4', 6'
widths, and 4', 8', 16' lengths. Custom sizes also available.
Shown below are just a few possible layouts.
 |
Built Better to Better Meet Your
Needs
With the strength of its design, Roll-A-Dock
can be extended to virtually any length you need. The basic
starter unit is a 16’ long wheel-end assembly. 4', 8' and 16'
add-on sections can be connected to make a single free-span dock
up to 48' long. For greater lengths, simply install a dock hinge
and continue adding sections, wheel kits and supports. Ramps,
triangular sections and side sections are also available to
complete your installation. Roll-A-Dock will provide a lifetime of
service. All-aluminum frames, galvanized steel frames and all
other components have been designed for low maintenance and
superior resistance to corrosion.
 |
Double Bracing
Roll-A-Dock’s unique “V” type bracing
reduces the clear span on a 32' dock to only 21'. This
design gives the wheel assembly superior strength both front
and rear and assures maximum stability on soft or rocky
bottoms.
|
 |
Double Strength Connections
With Roll-A-Dock’s exclusive connecting
system, there is no loss of strength, even at the joints.
The integrity of this design makes it possible to have a
steel frame dock up to 32' in length that requires no extra
supports.
|
 |
Bridged Framework
The Roll-A-Dock tapered frame
incorporates design principles proven in bridge and rafter
construction. This design provides maximum strength with a
minimum of weight. The open sides of the frame also improve
stability by reducing wave resistance.
|
 |
Inboard Mounted Winch and Cable
The height adjusting
winch and cable is located inside the dock frame for greater
safety. There are no exposed parts to snag – nothing to
damage your boat when you pull along side.
|
 |
Winch Operation
The height adjusting winch is operated
with a removable hand crank that is inserted in an opening
in the deck surface. Height adjustments can be made while
standing on the deck.
|
 |
Optional Light Dock Hinge
Recommended for use on longer,
multi-section docks equipped with two or more wheel
bases.
| Top
Classic Dock
Exceptional engineering redefines the
sectional dock
The Classic Dock offers the great
appearance and flexibility of a post and plank dock in a
high-strength modular system. The Classic is perfect for people
who want to make the most of their recreational time. Large 4' x
12' sections mean fewer parts for faster installation. Optional
wheel kits are also available to aid placement and removal.
Aluminum construction eliminates painting and requires little or
no maintenance. Modular design also makes it easy to add on or
change the configuration of your dock at any time.
Decking Options
For
details on decking materials, click here.
| Cedar |
Aluminum |
Design Your Own Dock
Layout
4' x 12' sections with three 4' x 4' drop in
deck panels per section. 5' and 8' pole lengths. Sections may be
connected in any combination. Shown below are just a few popular
layouts.
|
|
 |
Simplified Assembly
Pre-engineered components make installation a
breeze. A 1/2" wrench is the only tool needed for assembly.
Dock sections are secured and adjusted for height with the
turn of a bolt. 4' x 4' deck sections simply drop into place
– no fasteners needed. For a streamlined appearance, poles
may be cut flush or below the deck surface.
|
 |
Heavy-Duty
Framework
Classic frame sections are extremely
strong yet low in weight. A 4' x 12' section weighs just 90
lbs. Frames are made from rugged 2" x 5" double-wall
extruded aluminum and reinforced with one center beam and
two cross bars. Support poles, pads and fittings are also
made from low weight, corrosion resistant
aluminum. |
Top
Vers-A-Dock
Unique design, low weight modules for easy assembly
Vers-A-Dock sectional dock systems offer
many advantages over a traditional post and plank dock. Modular
components simplify setup, changes and removal. With smaller, low
weight frames and 4' x 4' drop-in deck sections, one person can
easily assemble an entire dock. A 4' x 8' frame section weighs
just 38 lbs. (54 lbs. with two poles attached). Deck sections are
only 36 lbs. each. Vers-A-Dock also features inside post mounts
for a smooth side wall with no protruding parts that could damage
boats. Create an almost unlimited variety of dock layouts using
nothing more than a combination of side clamps, straight and
corner pole brackets. Vers-A-Docks require little or no
maintenance.
Decking Options
For
details on decking materials, click here.
Design Your Own Dock
Layout
4' x 8' sections with two 4' x 4' drop in deck
panels per section. 5' and 8' pole lengths. Sections may be
connected in any combination.
 |
Solid
Construction
Vers-A-Dock modular frames are made
from high-strength double wall aluminum extrusions. Frames
are reinforced with a full-length center beam and cross bar.
Poles, pole brackets, section clamps and base plates are
also made from corrosion resistant
aluminum.
|
|
|
 |
Vers-A-Dock Mounting
System
A 1/2" wrench is the only tool needed for
assembly. The 4' x 8' frames are simply set in the pole
brackets, adjusted for height and secured with the turn of a
bolt. The 4' sq. deck sections are held firmly in place by
the side rails – no fasteners needed. For a streamlined
appearance, poles may be cut flush with the deck
surface. |
Top
Sectional Dock
Economical modular post and plank system
Hewitt Sectional Dock Systems offer greater
economy, quick setup and minimal maintenance. Frames and decking
are preassembled in easy to handle modules. The aluminum sides
wrap around the decking to maintain a crisp, clean appearance.
Section ends may be dressed off with optional aluminum or cedar
end caps. Hewitt Sectional Docks offer many layout possibilities
and give you the choice of three different decking
options.
Built to Last
Frames,
poles and brackets are all made from rustproof, corrosion
resistant aluminum – never needs painting. Extruded aluminum side
rails assures high strength and stability for a lifetime of
service. Decking is fitted into a continuous channel on both sides
and mechanically fastened for better support and
rigidity.
Size and Layout
Flexibility
Dock sections are 8’ long and come in both
4' and 6' widths. Sections may be joined end to end or turned at
right angles to form “L”s, “T”s, and platforms. A wide variety of
accessories are also available to further customize your
dock.
4' x 8' combined deck and frame sections, poles in 5' and
8' lengths, turn brackets (optional), and x-bracing stabilizer
bars (optional). Just a few popular layouts are shown below.
Decking Options
For
details on decking materials, click here.
 Bolt-On Post Brackets |
Deck and Side Rail
Construction |
Top
| 
